Cellbond are at the forefront of crash test barrier design and production and have been considered international industry specialists for nearly 30 years. We were the first company to offer a full range of deformable aluminium honeycomb barriers and many existing barrier types were developed with essential involvement from Cellbond.
Our deformable crash test barriers and other impactors are a crucial element used in both passive safety regulation and consumer information tests worldwide. We have worked closely with safety experts including EuroNCAP, IIHS and NHTSA in order to develop barriers that will cover a variety of regulatory standards and test protocols within Europe, the US and other countries.
- MPDB Frontal Offset Barrier
- Advanced 2000 Side Impact Barrier
- AEMDB Side Impact Barrier
- Frontal Offset Barrier
- Full Width Frontal Barrier
- IIHS Side Impact Barrier
- Moving Impact Trolleys
- NHTSA FMVSS214 Side Impact Barrier
- NHTSA Frontal Small Overlap/Oblique Barrier
The PDB was developed by Renault, based on the ADAC barrier for frontal offset compatibility testing. Both were designed not to bottom out even when testing heavier vehicles.
In 1999, after several years of development, Cellbond introduced a new barrier design for side impact tests according to ECE R95: The Advanced-2000. Various crush forces, progressively changing throughout the barrier, characterise each single block. This is achieved by a special manufacturing process, pioneered by Cellbond in 1994, during which the aluminium honeycomb elements are differentially etched.
The AE-MDB barrier was developed in answer to the ever-increasing size and stiffness of cars. The original prototype was made by Cellbond in 2001, and it was first presented in 2003, at the International Enhanced Safety of Vehicles (ESV) conference.
The Frontal Offset barrier was developed by EEVC WG11 with support from Cellbond and was taken over into the European regulation for occupant protection in frontal impacts that came into force in 1996.
Cellbond produces the full range of deformable crash test barriers. Various barriers and test procedures for occupant safety are well established. More recently the issue of partner safety i.e. vehicle compatibility has been added to research efforts of various international institutes.
Cellbond has a history of introducing new technologies and developing crash test barriers in close collaboration with its customers. In conjunction with the American Insurance Institute for Highway Safety (IIHS), Cellbond developed a barrier for side impact, based on the existing FMVSS 214 barrier.
To complement our range of Crash Test Barriers, we also manufacture and supply Moving Impact Trolleys.
Cellbond introduced the current method of honeycomb core certification and testing for energy absorption applications. This concept was adopted by NHTSA into the build requirements of FMVSS 214 and by EEVC Working Group 11 for the European frontal offset barrier.
Cellbond has been working in collaboration with the National Highway Traffic Safety Administration (NHTSA) in the US on a new research moving deformable barrier (RMDB) for frontal impacts that can recreate vehicle to vehicle collisions in two ways; small overlap impacts (SOI) and oblique offset impacts.